One Component Waterproofing Acrylic PUD Hybrid

Product	Polymer Type	Application	Solid（%））	Tg（°C）	Features
YS-8069	Acrylic	Single component waterproofing	50±1	9	Excellent elastic elongation outstanding effects in wet adhesion.
WA-8065U	Acrylic PUD hybrid	Single component waterproofing	47±1	7	Excellent elongation at break and tensile strength balance, especially at low temperature
PU-601	PUD	Single component waterproofing	45±1	-30	Soft film, good elasticity. suitable for wide range of waterproofing
RC-3716	Acrylic	Acrylic sealant	61±1	0	Thoroughly wet the construction surface to achieve high bond strength

YINYANG One Component Waterproofing Emulsion YS-8069

I. Product Description：

YS-8069 is specially designed for single pack waterproof coating.

It is a low odor, high elasticity, high molecular weight styrene/acrylate copolymer. It has a special molecular structure and excellent tensile properties. The hydrophilic structure and ingredients in the emulsion are strictly controlled. Therefore, it has excellent water resistance and outstanding effects in wet adhesion.

This product is APEO free, no added formaldehyde raw materials, low odor, environmentally friendly product.

● APEO free

● Low odor

● Excellent adhesion and water resistance

● Excellent elastic elongation

II. Typical Characteristics：

● Polymer type----------------------------------------Styrene acetate copolymer
● appearance ------------------------------------------Whit milky liquid with bluish light
● Solid content --------------------------------------- 50 ± 1%
● Brookfield viscosity -------------------------------800 -3000 centipoise (# 3/30 rpm / 25 ℃)
● pH value (25 ℃) ----------------------------------7.0-9.0
● Average particle diameter ------------------------ 0.10-0.20 microns

● Minimum film forming temperature (MFT)-----About 0 ℃

(The above is typical data, not the standard, actual standard is subject to COA)

YINYANG PUD For One-component Waterproofing PU-601

I. Description：

PU-601 is an aliphatic yellowing resistance waterborne polyurethane. The film of PU-601 is soft, good elasticity. Its film has good toughness and water resistance, suitable for wide range of waterproofing applications.

II. Typical Parameters

Polymer type-----------------------------------------Waterborne Polyurethane

Appearance-------------------------------------------White milky

Solid Content (%) -----------------------------------45 ± 1

PH -----------------------------------------------------8 ± 1

Viscosity（mpa.s 23℃ @3#60rpm）:----------500~1500

Elongation % --------------------------------------600-700

(The above is typical data, not the standard, actual standard is subject to COA)

III. Features:

● Good elasticity

● Good water resistance

● Good adhesion

Acrylic PUD Hybrid One Component Waterproofing

YINYAG Hybrid Waterproofing Emulsion WA-8065U

I. Product description：

Yinyang Synthetic Emulsion WA-8065U is an eco-friendly acrylic polyurethane hybrid emulsion designed specifically for roof and building waterproof coatings. It can meet the requirement of APEO free, Formaldehyde free and low VOC.

WA-8065U uses a special emulsion polymerization technology, which has excellent water resistance and alkali resistance, and its excellent initial wet adhesion solves the problem of poor adhesion of the coating due to slow drying of the substrate after wet and cold weather construction.

WA-8065U has excellent elongation at break and tensile strength balance, especially at low temperature , it also shows excellent elongation at break.

II. Typical Characteristics：

● Appearance ------------------------------------------White milky liquid
● Solid content --------------------------------------- 47.0 ± 1%
● Brookfield viscosity -------------------------------0 -300 centipoise (# 2/30 rpm / 25 ℃)
● PH value (25 ℃) ----------------------------------7.0-9.0

● Tg-----------------------------------------------------About 7 ℃

(The above is typical data, not the standard, actual standard is subject to COA)

Acrylic For Waterproofing Sealant.

YINYAG Acrylic for Waterproofing Sealant RC-3716

I. Product Description：

In sealant applications, in order to obtain high-performance sealant products, it is necessary to give the sealant elasticity. Commonly used acrylic co-polymers limit the performance of their elastic properties, because in order not to hinder the formation of polymer films, only a small amount of cross-linking mechanism is established between polymer chains. Yinyang Synthetic Emulsion RC-3716 is characterized by the establishment of a comprehensive cross-linked network between polymer chains without hindering the formation of polymer membranes.

Yinyang Synthetic Emulsion RC-3716 Fully Demonstrates The Advantages Of Emulsion Sealing Adhesives:

1. Thoroughly wet the construction surface to achieve high bond strength

2. Fully wetting the pigments and fillers contained in it to facilitate the provision of sealants with high pigment and filler ratio

3. Possesses low glass transition temperature and low temperature flexibility

4. Cured within a few days, the film is tough and not sticky

5. Excellent anti-contamination ability

6. It can increase the curing speed when heating application

Yinyang Synthetic Emulsion RC-3716 can be prepared into translucent and colored sealant according to the formula. They can easily pass the ASTMC920 Class±25% standard.

The establishment of the cross-linking mechanism of Yinyang Synthetic Emulsion RC-3716 depends on the pH value, and the sealant has excellent storage stability under alkaline conditions. In the process of forming a polymer film, with the volatilization of moisture during the drying process, a cross-linking mechanism is gradually formed. After the sealant is completely dried, the sealant can be cross-linked and cured.

II. Typical Characteristics：

● Polymer type----------------------------------------All acrylic co-polymer
● Appearance ------------------------------------------Whit milky liquid
● Solid content --------------------------------------- 61 ± 1%
● Brookfield viscosity -------------------------------100 -1000 centipoise (# 3/60 rpm / 25 ℃)
● pH value (25 ℃) ----------------------------------7.0-8.0
● Average particle diameter ------------------------ 0.25-0.40 microns

● Ion ----------------------------------------------------Anion

(The above is typical data, not the standard, actual standard is subject to COA)

http://www.yinyangpolymers.com/